• The site has now migrated to Xenforo 2. If you see any issues with the forum operation, please post them in the feedback thread.
  • An addendum to Rule 3 regarding fan-translated works of things such as Web Novels has been made. Please see here for details.
  • RIP @Silver Swallow
  • The issue with logging in with email addresses has been resolved.
  • Due to issues with external spam filters, QQ is currently unable to send any mail to Microsoft E-mail addresses. This includes any account at live.com, hotmail.com or msn.com. Signing up to the forum with one of these addresses will result in your verification E-mail never arriving. For best results, please use a different E-mail provider for your QQ address.
  • For prospective new members, a word of warning: don't use common names like Dennis, Simon, or Kenny if you decide to create an account. Spammers have used them all before you and gotten those names flagged in the anti-spam databases. Your account registration will be rejected because of it.
  • Since it has happened MULTIPLE times now, I want to be very clear about this. You do not get to abandon an account and create a new one. You do not get to pass an account to someone else and create a new one. If you do so anyway, you will be banned for creating sockpuppets.
  • Due to the actions of particularly persistent spammers and trolls, we will be banning disposable email addresses from today onward.
  • The rules regarding NSFW links have been updated. See here for details.

Electrical Engineering Trivia Thread

Ouch.

For that matter, when looking at VRMs and transformers, do not assume wattage in == wattage out, you will lose energy to heat and if you don't, you're probably doing something wrong(or you're magic).
 
vyor said:
Ouch.

For that matter, when looking at VRMs and transformers, do not assume wattage in == wattage out, you will lose energy to heat and if you don't, you're probably doing something wrong(or you're magic).
Click to expand...
Click to shrink...
Don't forget the Z=R+jX impedance and the wnding layout, including grounding of different types.

Usually the resistance is negligible at nominal conditions, leaving jX as a reactance on the line.
Winding type (Star-Star, Delta-Delta. Star-Delta) determines behaviour when the three-phase system isn't fully symmetrical (usually due to a short circuit). There is a mtehod to solve this issue, especially when transformers are involved, but it would take too long to explain.
Expanding on the previous point: grounded star windings are great when dealing with high voltage (120kV) systems.
Get used to dividing and multiplying by sqrt(3).
There is capacitance on everything, unless it's declared negligible.

Now for something outside of Energistics, yet extremely important for Electrical Engineering as a whole:
You solve for

z = exp(sT)

where T is the Sampling Period. Reducing it to a logarithm might sound appealing, but some analysis shows that once you start testing for equivalencies in stability criterions you find that things diverge wildly. Instead, when you take

z=exp(sT/2)/exp(-sT/2) ~ (1+sT/2)/(1-sT/2)

and "approximate" the numerator and denominator in the above way, then test each side for how stability on one side shows on the other.
You find that no matter which side you start on, once you start with a stable s=a+jß on the continuous side where a<0 (Real component is negative) or a z=r*exp(j*Th) where r<1 (magnitide less than one) you get a result on the other side of the equation that indicates stability and vice versa.

Testing for z when s->0+ (s approaches 0 from a higher value) you get a convergence to +1 from a higher value. This is for cases where Re{s}>0
Testing for z when s->0- (s approaches 0 from a lower value) you get a convergence to +1 from a lower value. This is for cases where Re{s}<0

Why is this important? You see, testing a system for stability in discrete and continuous complex frequency domain is easy: Determine the poles of the system, the roots of the denominator polynomial.

For continuous time systems, f(t) -> F(s), then test for every single pole (root). If real component Re{pi}<0 for every i=1...n where n is the order of the polynomial, then the system is surely stable.

For discrete time systems, f[k] -> F(z), then test for every single pole (root). If the magnitude of pi, |pi|<1 for every i=1...n where n is the order of the polynomial, then the system is surely stable.
Despite the fractional polynomial being a mere approximation the equivalence holds perfectly outside of (1,0) on the complex plane, despite having used a fairly crude approximation of an exponential function.
 
For those wanting to do DSP, one word: Don't. Outside defense, there are rather few jobs in pure DSP, and most image processing and speech is run by deep learning guys with CS degrees.

If you do do DSP, then by God read Shannon's theorem and the original derivation. If you know that well, and you know linear algebra decently well then 80% of DSP is pretty much just reading and minor understanding.
All stuff I wish I knew before leaving with a EE undergrad, hopefully someone can make use.
 
molemole said:
For those wanting to do DSP, one word: Don't. Outside defense, there are rather few jobs in pure DSP, and most image processing and speech is run by deep learning guys with CS degrees.

If you do do DSP, then by God read Shannon's theorem and the original derivation. If you know that well, and you know linear algebra decently well then 80% of DSP is pretty much just reading and minor understanding.
All stuff I wish I knew before leaving with a EE undergrad, hopefully someone can make use.
Click to expand...
Click to shrink...

The only real modern jobs in DPS are the designers for the damn things, and that ain't a big field.
 
vyor said:
The only real modern jobs in DPS are the designers for the damn things, and that ain't a big field.
Click to expand...
Click to shrink...
More hardware than anything else these days. The issue is that outside of a few firms like Microsoft and MERL, most Silicon Valley companies don't believe in using traditional signal processing for data conditioning. And most DSP for telecoms has been commodified, so the big market for DSP guys is more hardware/VLSI design than algorithm design and 'pure' DSP.
That will change once the system realizes that asking a CS graduate with no knowledge of sampling to code speech processing systems is suboptimal, but that'll take time. Until then, not much present.

DSP is damn near everywhere, at least in the mathematical sense. Telecoms? Check. Information retrieval? Check. Image systems? Check. Robotics and localization/SLAM? Check (mostly to check data integrity). Hardware? Of course, most specialist chips are built to run things like the Viterbi algorithm. Speech processing? Hell yes, but there's little market. Etc, etc, but it's become commiditized enough that one doesn't need a DSP engineer when one can hire a CS generalist, use some libraries and get more utility out of the guy. Sure, the marginal gains in performance from the DSP specialist will be gone, but who cares?
 
I'm always upset that tesla got fucked over and we lost wireless electricity and AC usable in everything
 
First. You can technically use a high power radio transmitter to beam energy, but it would be a system less efficient than most governments today.

Second. Flickering as a disturbance is mostly confined to 5-8Hz IIRC, and most outlets provide power at 50 or 60Hz.
 
LordVile said:
What?
Click to expand...
Click to shrink...
NuclearBird said:
First. You can technically use a high power radio transmitter to beam energy, but it would be a system less efficient than most governments today.

Second. Flickering as a disturbance is mostly confined to 5-8Hz IIRC, and most outlets provide power at 50 or 60Hz.
Click to expand...
Click to shrink...

Not exactly true. You notice it at 5-8hz fairly easily, but you know how fluorescent tubes can cause headaches? That's why. A very high frequency flicker.


I know my stuuuuuf
 
Huh. They didn't mention that in the energistics curriculum, just the 5-8Hz bit.
 
Well, it's only LEDs and Fluorescent tubes that get the flickering; incandescent bulbs don't see the same effect. But ya.
 
Also for the wireless transfer bit: Somewhat niche, but power control systems often 'dump' reactive power along the way at stepdown centers, at least in India. For long-range HVDC links for instance energy gets siphoned off for power factor improvement and control before conversion (usually with condensers of some sort, or a reactive load). Which cannot be done with wireless transfer unless at great expense, and so long-range power transmission is supremely inefficient.
 
molemole said:
Also for the wireless transfer bit: Somewhat niche, but power control systems often 'dump' reactive power along the way at stepdown centers, at least in India. For long-range HVDC links for instance energy gets siphoned off for power factor improvement and control before conversion (usually with condensers of some sort, or a reactive load). Which cannot be done with wireless transfer unless at great expense, and so long-range power transmission is supremely inefficient.
Click to expand...
Click to shrink...
On the matter of dumping reactive power: They only taught us that phi adjustments can be made by injecting capacitive current into the power line. Never heard it described as dumping power.

As for wireless transmission having difficulty with reactive power: You could probably alleviate the issue by matching the impedance of the converters on the sending/receiving end, the latter because some reactive power is needed for nominal operation of certain devices, at least on an industrial scale.
 
NuclearBird said:
On the matter of dumping reactive power: They only taught us that phi adjustments can be made by injecting capacitive current into the power line. Never heard it described as dumping power.

As for wireless transmission having difficulty with reactive power: You could probably alleviate the issue by matching the impedance of the converters on the sending/receiving end, the latter because some reactive power is needed for nominal operation of certain devices, at least on an industrial scale.
Click to expand...
Click to shrink...
At a very crude level, transformers are a consumer of power and a reactive load (inductive) in and of themselves (thanks to coil imperfections). Balancing that with capacitive loads makes for power factor improvement, albeit a slapdash approach that hasn't been in use for a while outside small microgrids in villages.
 
I was in conspiracy theory heals documentary guys, not in modern electrical engineering. My knowledge in that boils down to grounding exists, lightning goes up, and if you touch too much you die
 
vyor said:
Well, it's only LEDs and Fluorescent tubes that get the flickering; incandescent bulbs don't see the same effect. But ya.
Click to expand...
Click to shrink...
On the other hand, devices to convert AC to DC are not expensive, and could be attached to a receiver, or a lamp.
 
The direction of lightning mostl depends on the distribution of charge carriers between the clouds and the ground, but the info shared above is accurate as far as I can tell.

As for AC to DC converters (it's too early to make that joke), there remains the problem of phase shifitng and warping of the current under load due to the nonlinear characteristics of diodes and controlled transistors, especially in switching mode. A transformer stage could alleviate this, but then you'll have to match that to the power supply. This mostly concerns industrial applications, where three phase machines are used, along with the requisite three phase rectifiers.

Of course, you don't actually need to do all that much if you're feeling cheap and lazy. Just put a split capacitive load between the two input wires and ground the middle. Should smooth out the warped AC current.
 
NuclearBird said:
The direction of lightning mostl depends on the distribution of charge carriers between the clouds and the ground, but the info shared above is accurate as far as I can tell.

As for AC to DC converters (it's too early to make that joke), there remains the problem of phase shifitng and warping of the current under load due to the nonlinear characteristics of diodes and controlled transistors, especially in switching mode. A transformer stage could alleviate this, but then you'll have to match that to the power supply. This mostly concerns industrial applications, where three phase machines are used, along with the requisite three phase rectifiers.

Of course, you don't actually need to do all that much if you're feeling cheap and lazy. Just put a split capacitive load between the two input wires and ground the middle. Should smooth out the warped AC current.
Click to expand...
Click to shrink...

To a point anyway, you still get some impressive output ripple.
 
A device which works in Watts does not have the same sensitivity to ripple as most chips.

Also, is their any way for getting proper power transformers with all the taps for different voltages instead of ordering a custom one?
I tried to build a current limited +/-15v power supply for recharging batteries and lab bench stuff.
But damn near no body sells single transformers above 12v.
I will need to tear down a washing machine at this rate.
 
NuclearBird said:
Did you mean chips that consume power in the range of 1xN Watts?
Click to expand...
Click to shrink...
Yes, exactly.
An LED already has a regulated current source if you use DC, low frequency power ripple should be compensated for by the driver.
It's not as if it's logic ICs or communication equipment.
we know he frequency of the ripple so putting a bypass capacitor to create a LC filter at the frequency should give us 20dB/decade especially if the transformer inductance is taken into consideration.
 
Less EE trivia and more EE-application-trivia, I have heard that UMich Ann Arbor has hired several new faculty for computer vision/image processing. Funding has been granted from the Big Three for autonomous vehicles. For those who want to do a PhD in the area, it might be worth it to apply.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Back
Top